HMC433_10 Datasheet, PDF (1/6 Pages) Hittite Microwave Corporation – SMT GaAs HBT MMIC DIVIDE-BY-4, DC - 8 GHz

v04.0410
Typical Applications
4
Prescaler for DC to C Band PLL Applications:
• UNII, Point-to-Point & VSAT Radios
• 802.11a & HiperLAN WLAN
• Fiber Optic
• Cellular / 3G Infrastructure
Functional Diagram
HMC433 / 433E
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 8 GHz
Features
Ultra Low SSB Phase Noise: -150 dBc/Hz
Single-Ended I/O’s
Output Power: -2 to -3.5 dBm
Single DC Supply: +3V @ 53 mA
9 mm² Ultra Small Package: SOT26
General Description
The HMC433(E) is a low noise Divide-by-4 Static
Divider utilizing InGaP GaAs HBT technology in ultra
small surface mount SOT26 plastic packages. This
device operates from DC (with a square wave input)
to 8 GHz input frequency with a single +3V DC supply.
Single-ended inputs and outputs reduce component
count and cost. The low additive SSB phase noise of
-150 dBc/Hz at 100 kHz offset helps the user maintain
good system noise performance.
Electrical Specifications, T_A = +25° C, 50 Ohm System, Vcc= +3V
Parameter
Conditions
Maximum Input Frequency
Minimum Input Frequency
Sine Wave Input. [1]
Input Power Range
Fin= 1 to 6 GHz
Fin= 6 to 8 GHz
Output Power
Fin= 4 GHz
Fin= 8 GHz
Reverse Leakage
RF Output Terminated, Fin= 4 GHz, Pin= 0 dBm
SSB Phase Noise (100 kHz offset)
Pin= 0 dBm, Fin= 4 GHz
Output Transition Time
Pin= 0 dBm, Fout= 882 MHz
Supply Current (Icc)
Vcc= +3.0V
1. Divider will operate down to DC for square-wave input signal.
Min.
Typ.
Max.
Units
8
8.5
GHz
0.2
GHz
-12
+12
dBm
-3
+10
dBm
-5.0
-2.0
-6.5
-3.5
dBm
dBm
-25
dBm
-150
dBc/Hz
120
ps
53
71
mA
4 - 72
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]