HMC426MS8_08 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – SMT SiGe MMIC DIVIDE-BY-4, DC - 4 GHz

v00.0903
Evaluation PCB
HMC426MS8 / 426MS8E
SMT SiGe MMIC
DIVIDE-BY-4, DC - 4 GHz
6
List of Materials for Evaluation PCB 107622 ^[1]
Item
Description
J1 - J2
PCB Mount SMA RF Connector
J3 - J4
DC Pin
C1
1000 pF Capacitor, 0603 Pkg.
C2
4.7 uF Tantalum Capacitor
C3 - C4
100 pF Capacitor, 0402 Pkg.
C5
1000 pF Capacitor, 0402 Pkg.
U1
PCB ^[2]
HMC426MS8 / HMC426MS8E Divide-by-4
107620 Eval Board
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads should be connected directly to the ground
plane similar to that shown. A sufficient number of
via holes should be used to connect the top and
bottom ground planes. The evaluation circuit board
shown is available from Hittite upon request. This
evaluation board is designed for single ended input
and output testing.
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
6 - 65