HMC426MS8_08 Datasheet, PDF (4/6 Pages) Hittite Microwave Corporation – SMT SiGe MMIC DIVIDE-BY-4, DC - 4 GHz

v00.0903
Absolute Maximum Ratings
RF Input (Vcc = +3V)
+13 dBm
Vcc
+3.5V
Channel Temperature
150 °C
Continuous Pdiss (T = 85 °C)
(derate 7 mW/ °C above 85 °C)
460 mW
Thermal Resistance (R )(junction to lead) 142 °C/W
TH
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
Outline Drawing
HMC426MS8 / 426MS8E
SMT SiGe MMIC
DIVIDE-BY-4, DC - 4 GHz
6
Typical Supply Current vs. Vcc
Vcc (V)
Icc (mA)
2.7
10
3.0
13
3.3
16
Note: Divider will operate over full voltage range shown above
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
HMC426MS8
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC426MS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
H426
XXXX
H426
XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
6 - 63