HMCAD1512 Datasheet, PDF (5/30 Pages) Hittite Microwave Corporation – Coarse and Fine Gain Control

HMCAD1512
v01.0812
8-BIT, DUAL-CHANNEL 450 MS/S OR
SINGLE-CHANNEL 900 MS/S A-TO-D CONVERTER
Digital and Switching Specifications
AVDD = 1.8V, DVDD = 1.8V, OVDD = 1.8V, RSDS output data levels, unless otherwise noted
Parameter
Description
LVDS Output Timing Characteristics
t_data
T_PROP
LCLK to data delay time (excluding programmable phase shift)
Clock propagation delay.
LVDS bit-clock duty-cycle
Frame clock cycle-to-cycle jitter
Min
6*T_LVDS +2.2
45
T_EDGE
T_CLKEDGE
Data rise- and fall time 20% to 80%
Clock rise- and fall time 20% to 80%
Typ
50
7*T_LVDS +3.5
0.7
0.7
Max
Unit
7*T_LVDS +5.0
55
2.5
ps
ns
% LCLK cycle
% LCLK cycle
ns
ns
Table 1: Maximum Voltage Ratings
Pin
Reference pin
Rating
AVDD
AVSS
-0.3V to +2.3V
DVDD
DVSS
-0.3V to +2.3V
OVDD
AVSS
-0.3V to +3.9V
AVSS / DVSS DVSS / AVSS -0.3V to +0.3V
Analog inputs
and outputs
AVSS
-0.3V to +2.3V
CLKx
AVSS
-0.3V to +3.9V
LVDS outputs
DVSS
-0.3V to +2.3V
Digital inputs
DVSS
-0.3V to +3.9V
Applying voltages to the pins beyond those specified in
Table 1 could cause permanent damage to the circuit.
Table 2: Maximum Temperature Ratings
Operating Temperature
-40 to +85 °C
Storage Temperature
-60 to +150 °C
Maximum Junction Temperature
110 °C
Thermal Resistance (Rth)
29 °C/W
Soldering Profile Qualification
J-STD-020
ESD Sensivity HBM
Class 1C
ESD Sensivity CDM
Class III
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Stresses above those listed under Absolute Maximum
Ratings may cause permanent damage to the device. This
is a stress rating only; functional operation of the device
at these or any other conditions above those indicated in
the operational section of this specification is not implied.
Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
5
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]