HMC607G7_08 Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – GaAs MMIC SMT HIGH ISOLATION SPDT SWITCH, DC - 6 GHz

Evaluation PCB
v00.0307
HMC607G7
GaAs MMIC SMT HIGH ISOLATION
SPDT SWITCH, DC - 6 GHz
10
List of Materials for Evaluation PBC 116577 ^[1]
Item
Description
J1 - J3
PCB Mount SMA RF Connector
J4 - J8
DC Pin
R1 - R4
100 Ohm Resistor, 0402 Pkg.
U1
HMC607G7 SPDT Switch
PCB ^[2]
116575 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the final application
should be generated with proper RF circuit design
techniques. Signal lines at the RF port should have
50 ohm impedance and the package ground leads
and package bottom should be connected directly
to the ground plane similar to that shown above. The
evaluation circuit board shown above is available from
Hittite Microwave Corporation upon request.
[2] Circuit Board Material: Rogers 4350
10 - 376
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com