HMC607G7_08 Datasheet, PDF (4/6 Pages) Hittite Microwave Corporation – GaAs MMIC SMT HIGH ISOLATION SPDT SWITCH, DC - 6 GHz

Outline Drawing
v00.0307
HMC607G7
GaAs MMIC SMT HIGH ISOLATION
SPDT SWITCH, DC - 6 GHz
10
NOTES:
1. PACKAGE BODY MATERIAL: WHITE ALUMINA 92%
2. CONDUCTOR TRACES MATERIAL: THICK FILM TUNGSTEN.
3. LEAD, BASE, COVER MATERIAL: KOVAR™.
4. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN, OVER
ELECTROLYTIC NICKEL 50 MICROINCHES MIN.
5. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS].
6. TOLERANCES: .±005 [0.13] UNLESS OTHERWISE SPECIFIED.
7. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
Pin Descriptions
Pin Number
Function
1, 2, 3
RF2, RFC, RF1
Description
This pin is DC coupled and matched to 50 Ohm. Blocking
capacitors are required if RF line potential is not equal to 0V.
4
B
5
B
6
A
7
A
See truth table and control voltage table.
GND
Package bottom must also be connected to PCB RF ground.
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
10 - 375