HMC466LP4 Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – MMIC VCO w/ BUFFER AMPLIFIER, 6.1 - 6.72 GHz

v01.0604
MICROWAVE CORPORATION
Evaluation PCB
HMC466LP4
MMIC VCO w/ BUFFER
AMPLIFIER, 6.1 - 6.72 GHz
15
List of Materials
Item
Description
J1 - J2
PC Mount SMA RF Connector
J3 - J4
DC Pin
C1
4.7 µF Tantalum Capacitor
C2
10,000 pF Capacitor, 0603 Pkg.
U1
HMC466LP4 VCO
PCB*
105667 Eval Board
* Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown. A
sufficient number of via holes should be used to con-
nect the top and bottom ground planes. The evalua-
tion circuit board shown is available from Hittite upon
request.
15 - 94
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com