HMC466LP4 Datasheet, PDF (3/6 Pages) Hittite Microwave Corporation – MMIC VCO w/ BUFFER AMPLIFIER, 6.1 - 6.72 GHz

v01.0604
MICROWAVE CORPORATION
Absolute Maximum Ratings
Vcc
Vtune
Channel Temperature
Continuous Pdiss (T = 85°C)
(derate 6.28 mW/°C above 85°C)
Storage Temperature
Operating Temperature
+3.5 Vdc
0 to +11V
135 °C
565 W
-65 to +150 °C
-40 to +85 °C
HMC466LP4
MMIC VCO w/ BUFFER
AMPLIFIER, 6.1 - 6.72 GHz
Typical Supply Current vs. Vcc
Vcc (V)
Icc (mA)
2.75
22
3.0
31
3.25
41
Note: VCO will operate over full voltage range shown above.
Outline Drawing
15
15 - 92
NOTES:
1. MATERIAL PACKAGE BODY: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY
3. LEAD AND GROUND PADDLE PLATING: Sn/Pb SOLDER
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
6. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
7. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
9. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB
LAND PATTERN.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com