HMC434 Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – SMT GaAs HBT MMIC DIVIDE-BY-8, DC - 8.0 GHz

v01.1002
MICROWAVE CORPORATION
Evaluation PCB
10
HMC434
SMT GaAs HBT MMIC
DIVIDE-BY-8, DC - 8.0 GHz
Note: Line lengths on pins 1 & 4
(N/C) are not necessary.
List of Materials
Item
Description
J1 - J2
PC Mount SMA RF Connector
J3 - J4
DC Pin
C1 - C2
100 pF Capacitor, 0402 Pkg.
C3
1000 pF Capacitor, 0402 Pkg.
C4
10 µF Tantalum Capacitor, 1206 Pkg.
U1
HMC434 Divide-by-8
PCB*
105199 Eval Board
* Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads should be connected directly to the ground
plane similar to that shown. A sufficient number of via
holes should be used to connect the top and bottom
ground planes. The evaluation circuit board shown is
available from Hittite upon request.
10 - 88
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com