HMC426MS8 Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – SMT SiGe MMIC DIVIDE-BY-4, DC - 4.0 GHz

v00.0903
MICROWAVE CORPORATION
Evaluation PCB
10
HMC426MS8
SMT SiGe MMIC
DIVIDE-BY-4, DC - 4.0 GHz
List of Materials
Item
Description
J1 - J2
PC Mount SMA RF Connector
J3 - J4
DC Pin
C1
1000 pF Capacitor, 0603 Pkg.
C2
4.7 uF Tantalum Capacitor
C3 - C4
100 pF Capacitor, 0402 Pkg.
C5
1000 pF Capacitor, 0402 Pkg.
U1
HMC426MS8 Divide-by-4
PCB*
107620 Eval Board
* Circuit Board Material: Rogers 4350
The circuit board used in the final application should use
RF circuit design techniques. Signal lines should have
50 ohm impedance while the package ground leads
should be connected directly to the ground plane similar
to that shown. A sufficient number of via holes should
be used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from Hit-
tite upon request. This evaluation board is designed for
single ended input and output testing.
10 - 70
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com