HMC426MS8 Datasheet, PDF (3/6 Pages) Hittite Microwave Corporation – SMT SiGe MMIC DIVIDE-BY-4, DC - 4.0 GHz

10
v00.0903
MICROWAVE CORPORATION
Output Voltage Waveform,
Pin= 0 dBm, Fout= 500 MHz, T= 25 °C
500
400
300
200
100
0
-100
-200
-300
-400
-500
24.6 25 25.4 25.8 26.2 26.6 27 27.4 27.8
TIME (nS)
Input Return Loss
0
-5
-10
-15
-20
-25
-30
-35
0
1
2
3
4
INPUT FREQUENCY (GHz)
HMC426MS8
SMT SiGe MMIC
DIVIDE-BY-4, DC - 4.0 GHz
Absolute Maximum Ratings
RF Input (Vcc = +3V)
+13 dBm
Vcc
Channel Temperature
Continuous Pdiss (T = 85 °C)
(derate 7 mW/ °C above 85 °C)
Thermal Resistance (R_TH)
(junction to lead)
+3.5V
150 °C
460 mW
142 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
Typical Supply Current vs. Vcc
Vcc (V)
Icc (mA)
2.7
10
3.0
13
3.3
16
Note: Divider will operate over full voltage range shown above
Outline Drawing
10 - 68
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEADFRAME MATERIAL: COPPER ALLOY
3. LEADFRAME PLATING: Sn/Pb SOLDER
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com