HMC734LP5_10 Datasheet, PDF (3/6 Pages) Hittite Microwave Corporation – MMIC VCO w/ DIVIDE-BY-4 8.6 - 10.2 GHz

v03.0609
Divide-by-4 Frequency
vs. Tuning Voltage, Vcc = +5V
4
+25C
3.5
+85C
-40C
3
2.5
2
1.5
1
0 1 2 3 4 5 6 7 8 9 10 11 12 13
TUNING VOLTAGE (V)
Outline Drawing
8
HMC734LP5 / 734LP5E
MMIC VCO w/ DIVIDE-BY-4
8.6 - 10.2 GHz
Divide-by-4 Output Power
vs. Tuning Voltage, Vcc = +5V
-1
-2
-3
-4
-5
+25C
-6
+85C
-40C
-7
0 1 2 3 4 5 6 7 8 9 10 11 12 13
TUNING VOLTAGE (V)
8-3
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN.
Part Number
HMC734LP5
Package Body Material
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC734LP5E RoHS-compliant Low Stress Injection Molded Plastic
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
100% matte Sn
MSL Rating
MSL3 ^[1]
MSL3 ^[2]
Package Marking ^[3]
H734
XXXX
H734
XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]