HMC437MS8G_06 Datasheet, PDF (3/6 Pages) Hittite Microwave Corporation – SMT GaAs HBT MMIC DIVIDE-BY-3, DC - 7.0 GHz

v03.0705
HMC437MS8G / 437MS8GE
SMT GaAs HBT MMIC
DIVIDE-BY-3, DC - 7.0 GHz
5
Output Voltage Waveform,
Pin= 0 dBm, Fout= 882 MHz, T= 25 °C
Absolute Maximum Ratings
300
RF Input (Vcc= +5V)
+13 dBm
200
Vcc
+5.5V
100
Maximum Channel Temperature
135 °C
0
Continuous Pdiss (T=85 °C)
(derate 9.85mW/°C above 92 °C)
424mW
-100
Storage Temperature
-65 to +150 °C
-200
Operating Temperature
-40 to +85 °C
-300
DC blocking capacitors are required at RF input and RF output ports.
Choose value for lowest frequency of operation.
-400
-500
22.5
23
23.5
24
24.5
25
25.5
TIME (ns)
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Typical Supply Current vs. Vcc
Vcc (V)
Icc (mA)
4.75
64
5.0
69
5.25
75
Note: Divider will operate over full voltage range shown above
Outline Drawing
5 - 86
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
HMC437MS8G
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC437MS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
H437
XXXX
H437
XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com