HMC437MS8G_06 Datasheet, PDF (1/6 Pages) Hittite Microwave Corporation – SMT GaAs HBT MMIC DIVIDE-BY-3, DC - 7.0 GHz

HMC437MS8G / 437MS8GE
v03.0705
SMT GaAs HBT MMIC
DIVIDE-BY-3, DC - 7.0 GHz
5
Typical Applications
Prescaler for DC to C Band PLL Applications:
• UNII, Point-to-Point & VSAT Radios
• 802.11a & HiperLAN WLAN
• Fiber Optic
• Cellular / 3G Infrastructure
Features
SSB Phase Noise: -153 dBc/Hz @100KHz
Wide Bandwidth
Output Power: -1 dBm
Single DC Supply: +5V @ 69 mA
MS8G SMT Package
Functional Diagram
General Description
The HMC437MS8G & HMC437MS8GE are low noise
Divide-by-3 Static Dividers utilizing InGaP GaAs HBT
technology in low cost 8 lead surface mount plastic
packages. This device operates from DC (with a
square wave input) to 7.0 GHz input frequency from a
single +5.0V DC supply. The low additive SSB phase
noise of -153 dBc/Hz at 100 kHz offset helps the user
maintain good system noise performance.
Electrical Specifications, T_A = +25° C, 50 Ohm System, Vcc= 5V
Parameter
Conditions
Maximum Input Frequency
Minimum Input Frequency
Sine Wave Input [1]
Input Power Range
Fin= 1 to 6 GHz
Fin= 6 to 7 GHz
Output Power
Reverse Leakage
Both RF Outputs Terminated
SSB Phase Noise (100 kHz offset)
Pin= 0 dBm, Fin= 6 GHz
Output Transition Time
Pin= 0 dBm, Fout= 882 MHz
Supply Current (Icc)
1. Divider will operate down to DC for square-wave input signal.
Min.
Typ.
Max.
Units
7.0
7.5
GHz
0.1
GHz
-12
-15
+12
dBm
-10
-15
+10
dBm
-4
-1
dBm
-50
dBm
-153
dBc/Hz
100
ps
69
mA
5 - 84
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com