HMC435MS8G_10 Datasheet, PDF (3/4 Pages) Hittite Microwave Corporation – SPDT NON-REFLECTIVE SWITCH, DC - 4 GHz

11
HMC435MS8G / 435MS8GE
v05.0110
SPDT NON-REFLECTIVE
SWITCH, DC - 4 GHz
Absolute Maximum Ratings
Control Voltage Range
RF Input Power Vctl = 0/+5V
RF1, RF2 Termination
Junction Temperature
Continuous Pdiss
(derate 8 mW/ °C above 85 °C)
Thermal Resistance - Insertion Loss Path
(channel to ground paddle)
Thermal Resistance - Termination Path
(channel to ground paddle)
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
-0.5 to +7.5 Vdc
+31 dBm
+26 dBm
150 °C
0.52 W
118 °C/W
125 °C/W
-65 °C to +150 °C
-40 °C to +85 °C
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
Control Voltages
*Control Input Tolerances are ± 0.2 Vdc
State
Low
High
Bias Condition*
0 Vdc @ 25 μA Typical
+5 Vdc @ 25 μA Typical
Truth Table
Control Input
A
B
Low
High
High
Low
Signal Path State
RFC to:
RF1
RF2
DC blocks are required at ports RFC, RF1, RF2.
Do not operate continuously at RF power input greater than
1 dB compression and do not “Hot Switch” power levels
greater than +24 dBm (control = 0/+5 Vdc).
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
11 - 124
Package Information
Part Number
Package Body Material
HMC435MS8G
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC435MS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
H435
XXXX
H435
XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com