HMC232LP4_10 Datasheet, PDF (3/6 Pages) Hittite Microwave Corporation – GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 12 GHz

v04.0110
HMC232LP4 / 232LP4E
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 12 GHz
11
Absolute Maximum Ratings
RF Input Power (Vctl = -5V)
(0.5 - 12 GHz)
RF1, RF2 Termination
Control Voltage Range (A & B)
Channel Temperature
Thermal Resistance (R )
TH
(junction to lead)
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
+30 dBm (@ +50 °C)
+23.5 dBm
+1V to -7.5V
150 °C
94 °C/W
-65 to +150 °C
-40 to +85 °C
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
Control Voltages
State
Low
High
Bias Condition
0 to -0.2V @ 10 uA Max.
-5V @ 10 uA Typ. to -7V @ 45 uA Typ. (0.5 Vdc)
Truth Table
Control Input
Signal Path State
A
B
RFC to RF1 RFC to RF2
High
Low
ON
OFF
Low
High
OFF
ON
Caution: Do not “Hot Switch” power levels greater than +27
dBm (Vctl = 0/-5 Vdc).
11 - 56
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Part Number
HMC232LP4
Package Body Material
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC232LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
H232
XXXX
H232
XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com