HMC683LP6C Datasheet, PDF (1/10 Pages) Hittite Microwave Corporation – HIGH IP3 DUAL CHANNEL DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz

HMC683LP6C / 683LP6CE
v02.0808
HIGH IP3 DUAL CHANNEL
DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz
Typical Applications
9
The HMC683LP6C(E) is Ideal for:
• Cellular/3G & LTE/WiMAX/4G
• Basestations & Repeaters
• GSM, CDMA & OFDM
• Dual Density Receivers
Functional Diagram
Features
High Input IP3: +23 dBm
Conversion Gain: 7.5 dB
Low LO Drive: 0 dBm
High Channel Isolation
40 Lead 6x6mm SMT Package: 36mm²
General Description
The HMC683LP6C(E) is a high linearity, dual channel
downconverter with integrated LO amplifier in a 6x6
SMT QFN package covering 0.7 - 1.0 GHz. Excellent
input IP3 performance of +23 dBm for down conversion
is provided for 3G & 4G GSM/CDMA applications at
an LO drive of 0 dBm. With an input 1 dB compression
of +11 dBm, the RF port will accept a wide range of
input signal levels. Conversion gain is 7.5 dB typical.
The 60 - 500 MHz IF frequency response will satisfy
various GSM/CDMA receive frequency plans.
9-1
Electrical Specifications, T_A = +25 °C, IF - 100 MHz, LO = 0 dBm
Vcc1, 2 = Vcc_BAL1, 2 = Vcc_AMP1, 2 ^[1] = Vcc_IF1P, N = Vcc_IF2P, N = +5V, BIAS1, 2 = +2.5V
Parameter
Min.
Typ.
Frequency Range, RF
700 - 1000
Frequency Range, LO
570 - 900
Frequency Range, IF
60 - 500
Conversion Gain
5
7.5
Noise Figure (SSB)
11
LO to RF Isolation
10
16
LO to IF Isolation
15
20
RF to IF Isolation
19
28
IP3 (Input)
23
1 dB Compression (Input)
11
Channel to Channel Isolation
50
LO Drive Input Level (Typical)
-3 to +3
Supply Current (Icc)
420
[1] See Application Circuit [2] Unless otherwise noted all measurements with low side LO & IF = 100 MHz.
Max.
520
Units
MHz
MHz
MHz
dB
dB
dB
dB
dB
dBm
dBm
dB
dBm
mA
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]