HMC491LP3 Datasheet, PDF (1/8 Pages) Hittite Microwave Corporation – GaAs MMIC LOW NOISE AMPLIFIER w/ BYPASS MODE, 3.4 - 3.8 GHz

v00.0503
HMC491LP3
MICROWAVE CORPORATION
GaAs MMIC LOW NOISE AMPLIFIER
w/ BYPASS MODE, 3.4 - 3.8 GHz
8
Typical Applications
The HMC491LP3 is ideal for:
• Wireless Local Loop (WLL)
• Fixed Wireless Access
• Microwave & VSAT Radios
Functional Diagram
Features
Gain: 16 dB
Noise Figure: 2.0 dB
Single Supply: +3.0 V @ 9 mA
Integrated Bypass Mode
50 Ohm Matched Input/Output
3 x 3 x 1 mm QFN SMT Package
General Description
The HMC491LP3 is a versatile, integrated, Low
Noise Amplifier (LNA) featuring a bypass mode
intended for 3.4 to 3.8 GHz Fixed Wireless &
WLL applications. The amplifier provides 16 dB
of gain, 2 dB noise figure and +3 dBm input IP3
while requiring only 9 mA from a +3V supply.
Using a single control line, the LNA can be
switched into a low loss 2.2 dB bypass mode
reducing the current consumption to 20 µA. A
low cost, leadless 3x3 mm QFN surface mount
package (LP3) houses the amplifier. No external
RF matching components are required.
8 - 260
Electrical Specifications, T = +25° C, Vdd = +3V
A
Parameter
LNA Mode
Min. Typ. Max.
LNA Mode
Min. Typ. Max.
Frequency Range
3.4 - 3.6
3.6 - 3.8
Gain
Gain Variation Over Temperature
Noise Figure
14.5
17
0.012 0.02
2.2
2.7
13
15.5
0.012 0.02
2.0
2.5
Input Return Loss
12
17
Output Return Loss
Reverse Isolation
9
7
34
33
Input or Output Power for 1dB Compression (P1dB)*
3
6
4
7
Input Third Order Intercept (IP3)
(-20 dBm Input Power per tone, 1 MHz tone spacing)
1
3
Supply Current (Idd)
9
9
Bypass Mode
Min. Typ. Max.
Units
3.4 - 3.8
MHz
-2.8 -2.3
dB
0.004 0.008 dB / °C
--
--
dB
18
dB
11
dB
--
dB
25
28
dBm
11
dBm
0.03
mA
* P1dB for LNA Mode is referenced to RFOUT while P1dB for Bypass Mode is referenced to RFIN.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com