|
HD404339 Datasheet, PDF (30/78 Pages) Hitachi Semiconductor – 4-bit HMCS400-Series microcomputer with large-capacity memory | |||
|
◁ |
HD404339 Series
I/O Ports
The MCU has 53 input/output pins (D0âD13, R00âR93) and one input-only pin (RA1).
⢠The 30 pins consisting of ports D0âD13, R1, R2, R8, and R9 are all high-voltage I/O pins. RA1 is a high-
voltage input-only pin. The high-voltage pins can be equipped with or without pull-down resistance, as
selected by the mask option.
⢠All standard voltage output pins are CMOS output pins. However, the R02/SO pin can be programmed
for NMOS open-drain output.
⢠In stop mode, input/output pins go to the high-impedance state.
⢠All standard voltage input/output pins have pull-up MOS built in, which can be individually turned on
or off by software (Table 5).
Pull-up MOS on/off settings can be made independently of settings as on-chip supporting module pins.
Table 5 Control of Standard I/O Pins by Program
MIS3 (bit 3 of MIS)
DCR
PDR
CMOS buffer PMOS
NMOS
Pull-up MOS
Note: â indicates off.
0
1
0
1
0
1
0
1
0
1
0
1
0
1
â
â
â
On
â
â
â
On
â
â
On
â
â
â
On
â
â
â
â
â
â
On
â
On
30
|
▷ |