HD26LS32A Datasheet, PDF (3/5 Pages) Hitachi Semiconductor – Quadruple Differential Line Receivers With 3 State Outputs

HD26LS32A
Electrical Characteristics (Ta = 0 to +70°C)
HD26LS32A
Item
Differential Input High
Threshold Voltage
Differential Input Low
Threshold Voltage
Input Hysteresis ^*2
Enable Input Voltage
Enable Input
Clamp Voltage
Symbol Conditions
Min
VTH
VOH = 2.7V, IOH = –440µA
VIC =
–7 to +7 V
VTL
VOL = 0.4 V, IOL = 4 mA
VTH–VTL
VOL = 0.45 V, IOL = 8 mA
VIH
2.0
VIL
VIK
VCC = 4.75 V, IIN = –18 mA
Typ ^*1 Max
0.2
Unit
V
–0.2
–0.2
50
mV
V
0.8
–1.5
Output Voltage
VOH
VCC = 4.75V, ^{VID = 1V, IOH = –440µA 2.7}
VOL
VIL (G)
VID = –1 V, IOL = 4 mA
= 0.8V
VID = –1 V, IOL = 8 mA
0.4
0.45
Off State(High Impedance) _IOZ
Output Current
VCC = 5.25V VO = 2.4 V
VO = 0.4 V
20 µA
–20
Line Input Current
II
VI = 15 V, Other Inputs–10 to +15 V
VI = –15 V, Other Inputs–15 to +10 V
2.3 ^mA
–2.8
Enable Input Current
II (EN) _{VI = 5.5 V}
IIH
VI = 2.7 V
100 _µA
20
IIL
VI = 0.4 V
–0.36 mA
Input Resistance
Short Circuit
Output Current
ri
VIC = –15 to +15 V(Other Inputs AC GND) 6
9.8
KΩ
IOS ^*3 VCC = 5.25 V
–15
–85 mA
Supply Current
ICC
VCC = 5.25V, VI = 0V(All Outputs Disable)
52 70
Notes: 1. All typical values are at VCC=5V, Ta=25°C,VIC=0.
2. Hysteresis is the differential between the positive going input threshold voltage and the
negative going input threshold voltage.
3. Not more than one output should be shorted at a time.
3