HB2881000A5 Datasheet, PDF (1/66 Pages) Hitachi Semiconductor – FLASH ATA Card 1 GByte

HB2881000A5
FLASH ATA Card
1 GByte
ADE-203-1182 (Z)
Preliminary
Rev. 0.0
May. 23, 2000
Description
HB2881000A5 is Flash ATA card. This card complies with PC card ATA standard and is suitable for the
usage of data storage memory medium for PC or any other electric equipment. This card is equipped with
Hitachi 256 Mega bit Flash memory. This card is suitable for ISA (Industry Standard Architecture) bus
interface standard, and read/write unit is 1 sector (512 bytes) sequential access. By using this card it is
possible to operate good performance for the system which have PC card slots.
Features
• PC card ATA standard specification
 68 pin two pieces connector and Type II (5 mm)
• 3.3 V/5 V single power supply operation
• ISA standard and Read/Write unit is 512 bytes (sector) sequential access
 Sector Read/Write transfer rate: 8MB/sec burst
• Card density is 1 Giga bytes
 This card is equipped Hitachi 256 Mega bit Flash memory
• 3 variations of mode access
 Memory card mode
 I/O card mode
 True IDE mode
• Internal self-diagnostic program operates at V_CC power on
• High reliability based on internal ECC (Error Correcting Code) function
• Data write is 300,000 cycles
• Data reliability is 1 error in 10¹⁴ bits read.
• Auto Sleep Function
Preliminary: The specifications of this device are subject to change without notice. Please contact your
nearest Hitachi’s Sales Dept. regarding specifications.