IC13T-68D-FEJ Datasheet, PDF (8/8 Pages) Hirose Electric – FPC Connectors for CardBus PC Cards

BMethod of Mounting to the Equipment
1. Insert the IC13 FPC portion to the FH16 connector (i.e.,
FPC connector) on an upward angle.
FH16
IC13
3. Fasten the PC card slot to the case with screws.
(M2 screws are recommended.)
Be careful that a load is not placed upon the FPC and FH16
at this time.
M2
2. Fasten the lock of the FH16 connector (i.e., FPC connector) 4. Completion
and connect the FPC portion.
Fixed (screw fastended)portion:4-Ø5.5MAX
6±0.05
FPC side
58±0.05
Positioning
boss:4-Ø2
0
-0.
4.8±0.
Note: See the FH16 Series catalog for details about the FPC insertion and
removal methods.
When handling, please hold the portion indicated by the arrow marks with the button pulled out as illustrated in the diagram below. If the portion connected to
the ejection fitting is held with the button pushed in, the fitting might come loose.
Portion connected to
the ejection fitting
Button pulled out
Button pushed in
A47