W-FL Datasheet, PDF (6/6 Pages) Hirose Electric – Ultra Small Surface Mount Coaxial Connectors – 1.4mm Mated Height

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
sUsage Precautions
1. Plugs
(1) Mating/ un-mating
1) Mating.
1) Both parts must be aligned on the axis to mate correct. Press down firmly. A tactile “click” will confirm fully
mated condition.
2) Un-mating.
1) Fully insert the tool under the plug’s flanges as shown.
1) Apply even force upward until the plug is free.
W.FL-LP-N plug extraction tool
W.FL Cable
Assembly
Do not twist, apply excessive forces or sharp bends to the cable.
W.FL-R-SMT-1
(2) Cable handling
W.FL-LP-040
Cable Assembly
W.FL-R-SMT-1
Receptacle
∞
2N max
(3) Precautions
∞
Do NOT forcefully twist or deform wires.
2. Receptacles
(1) Recommended soldering
temperature profile
Peak temperature and time
[ç]
240ç 3 seconds
260
240
220
200
183ç
180
160
Preheating (130ç to 165ç)
140
120
100
Within 2 minutes
80
40 to 50 seconds
Time
(2) Recommended screen thickness
1) The temperature profile indicates the board surface temperature at the point of contacts with the connector
terminals.
2) The temperature may vary, depending on the board size, the solder paste type and thickness.
0.1 to 0.12 mm
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: [phone], FAX: [phone]
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
6