ID2M-8S-2.54DS Datasheet, PDF (4/4 Pages) Hirose Electric – Smart Card Sockets

Method of Using the Sockets
1. The orientation of the card should have the contact surface inserted face-down as
illustrated in the diagram below.
Card insertion direction
Card contact surface faces downward
2. After the smart card has been inserted, be sure not to appy excessive force to the
card portion that protrudes from the insertion slot.
3. When the board warps greatly due to solder flow, the socket may rise up from the
board.Please limit as much as possible this board warpage due to solder flow.
Washing Conditions
This product is a no-wash item, but in the case of washing, please observe the following conditions.
1.Oranic Solvent Washing
Solvent
IPA(Isopropyl alcohol)
HCFC(Hydrochlorofluorocarbon)
Normal temperature washing
Yes
Yes
Heated washing
Yes
Yes
2.Water Type Washing
When using water type cleaning agents(e.g., terpene, and alkali saponifiers), select the cleaning agent based on the documentation issued by the
various manufacturers of cleaning agents which describes the effects on metals and resins.Be careful that parts are not left with moisture remaining
on them
3.Washing Precautions
Residual flux or cleaning agent on the contacts when washing with organic solvents or water type cleaners can give rise to the deterioration of elec-
trical performance. In this regard it is important to check whether a thorough washing has been performed.
C38