ID2M-8S-2.54DS Datasheet, PDF (2/4 Pages) Hirose Electric – Smart Card Sockets

sProduct Specification
Rating
Current rating 1A
Operating temperature -50ç to +80ç(NOTE 1)
Voltage rating 150V AC Operating humidity
40 to 80%
Storage temperature
Storage humidity
-40ç to +60ç(NOTE 1)
40 to 70%(NOTE 2)
Item
Specification
Conditions
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
1000 M ohms min.
No flashover or insulation breakdown.
30 m ohms max.(40m ohms max.for switch portion)
500 VDC
500 V AC / 1 minute
20 mV AC max.,measured at 1 mA
4. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm ,
2 hours in each of the 3 directions.
5. Humidity(Steady state)
Contact resistance: 40 m ohms max. (50 m ohms max.for the switch portion)
Insulation resistance: 1000M ohms man.
96 hours at temperature of 40ç and
humidity of 90% to 95%
6. Temperature cycle
Contact resistance: 40 m ohms max. (50 m ohms max.for the switch portion) (-55ç: 30 minutes/ 5 to 35ç:10 minutes/85ç:30 minutes
Insulation resistance: 1000M ohms man.
/ 5 to 35ç:10 minutes)for 5 cycles
7.Durability
(mating/unmating)
Contact resistance: 40 m ohms max.
(50 m ohms max.for the switch portion)
100000 cycles
9.Resistance to
soldering heat
No deformation of components
affecting performance.
Flow: 255° for 5 seconds
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity
range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
Materials
Part
Insulator
Singnal contacts
Switch contacts
Material
PBT
Phosphor bronze
Phosphor bronze
Brass
Finish
Color:Black
Contact portion:gold plating
Lead portion: Solder plating
Gold plating
Gold plating
Ordering Information
ID2M -- 8 S -- 2.54 DS
1
23
4
5
1 Series name: ID2M
2 Number of contacts:8
3 Contacts type S: Socket
4 ^{Contact pitch: 2.54 mm}
5
Terminal type
DS:Right-angle dip
Remarks
UL94V-0
C36