FX2C-20S-1.27DSA Datasheet, PDF (31/31 Pages) Hirose Electric – 1.27mm Pitch Multi-function Two Piece Connector

5. SMT Type Connector Mounting Temperature Profile (Reference)
qIR Reflow
Applicable Conditions
Reflow system
Solder
Test board
Metal mask thickness
:IR reflow
: Paste type 63 Sn/37 Pb
(Flux content 11 wt%)
: Glass epoxy 110mm x 40mm x 1.6 mm
: 0.2 mm (Straight type)
0.15mm (Right angle type)
Recommended temperature profile.
The temperature may be slightly changed according to the solder
paste type and amount.
6. SMT Type Connector mated height
As shown in the application pattern, the mated height of the male/female connector doesn't contain the solder paste thickness. Thus,
after the connector installation in the board, consider that the mated height will be widened in proportion to the solder paste
thickness.
A175