FX2C-20S-1.27DSA Datasheet, PDF (2/31 Pages) Hirose Electric – 1.27mm Pitch Multi-function Two Piece Connector

3. Board to board type
q Flux swell prevention
The straight through hole type takes the complete flux
tight action from the board back side at solder dipping.
The type is prepared, corresponding to whether or not
cleaning is required.
w Stack height 12mm to 16mm
The board stack height can be set to every 1 mm unit up
to 12 to 16mm.
e Mis-insertion preventive mechanism
The mating area is designed in a mechanism so as to
prevent mis-insertion, and complete countermeasures
have been taken against wrenching.
sApplications
Computers, peripheral equipments, various machines etc.
4. Board to cable type
q Complete lock with easy operation
Employing the inner lock system, complete lock and eject
actions can be performed with easy operation.
w Applicable cable
The applicable cable is the <UL2651>AWG#28 flat cable
(7/0.127mm), and the jacket size is 0.9±0.1mm.
5. SMT type
Strength security with metaltab
The right angle type is equipped with metaltab to secure
soldering strength, and constructed so as to fix by
screws. The straight type can choose whether or not
metaltab are required.
sProduct Specifications
Rating
Current rating 0.5A
Operating Temperature Range -55ç to +85ç (Note 1) Storage Temperature Range -10ç to +60ç (Note 2)
Voltage rating 125V AC Operating Humidity Range 40 to 80%
Storage Humidity Range 40 to 70% (Note 2)
Item
Specification
Condition
1. Insulation Resistance 1000M ohms min
250V DC
2. Withstanding Voltage No flashover or insulation breakdown.
300V AC/1 minute
3. Contact Resistance 45m ohms max.
100mA
4. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Humidity (Steady state) Contact resistance: 55m ohms max. Insulation resistance: 100M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle
Contact resistance: 55m ohms max.
Insulation resistance: 100M ohms min.
No damage, cracks, or parts looseness.
(-55ç: 30 minutes¡15 to 35ç: 2 to 3 minutes ¡
(-85ç: 30 minutes¡15 to 35ç: 2 to 3 minutes) 5 cycles
7. Durability (Mating/un-mating) Contact resistance: 55 m ohms max.
500 cycles
8. Resistance to soldering heat No deformation of components affecting performance. ^{Reflow: At the recommended temperature profile}
Manual soldering: 260ç for 10 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Insulator
Contact
Parts
Dip type
Socket
SMT type
Receptacle
Socket
Header
Material
Polyamid
PBT/Polyamid
PPS
Phosphor bronze
Phosphor bronze or brass
Finish
Black
Light brown
Selective gold plated
Remark
UL94V-0
________
sStacking Variation
Header
Dip type
SMT type
Receptacle
FX2C-*P-1.27DSA(L)
FX2CA-*P-1.27DSA(L)
FX2CA1-*P-1.27DSA(L)
FX2CA2-*P-1.27DSA(L)
FX2-*P-1.27SV(L)
Dip type
FX2C-*S-1.27DSA(L) FX2C2-*S-1.27DSA(L)
FX2CA-*S-1.27DSA(L) FX2CA2-*S-1.27DSA(L)
12.0
14.0
13.0
15.0
14.0
16.0
12.1
14.1
Unit:mm
SMT type
FX2-*S-1.27SV(L)
12.2
13.2
14.2
12.3
A143