W-FL2 Datasheet, PDF (2/6 Pages) Hirose Electric – Ultra-Small Surface Mount Coaxial Connectors - 1.18mm Mated Height

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoH_WS p_.r_Fod_Lu₂cts_Sh_ea_rv_ie_eb_se_qen_Udi_ls_tc_ro_ant_-i_Snu_med_a, o_lr_l w_Sil_ul b_re_fadi_csc_eon_Mtin_oue_ud_ns_too_Cn._oPl_aea_xs_ie_ac_lh_Cec_ok _nth_ne _ep_cro_td_ouc_rt_ss s_-ta₁t_.u₁s₈on_mth_me H_Miro_ase_tew_debs_Hit_ee _iR_goH_hS_t search at www.hirose-connectors.com, or contact your Hirose sales representative.
sSpecifications
Rating
Nominal characteristic impedance
50ø
Frequency range
DC to 6 GHz
Operating temperature range
Storage temperature range
-40°C to +90°C
(RH 90% max.)
-30°C to +70°C
(RH 90% max.)Note 1
Item
Specification
1. Contact resistance 20 mø max. (center contact), l0 mø max. (outer contact)
2. Insulation resistance 500 Mø min., 100 V DC
3. Withstanding voltage 200 V AC / 1 minute
4. V.S.W.R.
1.3 max. (DC to 3 GHz)
1.4 max. (3 GHz to 6 GHz)
* V.S.W.R. Measurement
as shown on the block diagram below.
Note: Verify connection and measurement setup.
Network Analyzer
Test Set
Test Port
Test Post Cable
D.U.T Termination
Note1: Cable assembly measurements with SMA conversion adapters
mated with W.FL2 plug at each end of the 100cm long ultra-fine
coaxial cable.
Note2: Receptacles mounted on a 50 ohms glass epoxy board.
Measurements were conducted with SMA conversion adapters
attached.
Note1. The term “storage” refers to products stored for long period of time prior to mounting and use.
sMaterials
qPlugs – Right Angle
Part
Shell
Insulator
Female center contact
qReceptacle
Part
Shell
Insulator
Male center contact
sPlugs
qCable
Material
Phosphor bronze
PBT
Phosphor bronze
Material
Phosphor bronze
LCP
Brass
Finish
Silver plated
Color: Black, UL94V-0
Gold plated
Finish
Silver plated
Color: Black, UL94V-0
Gold plated
3.3
Plugs can be ordered only as terminated cable assemblies.
2
All dimensions: mm