FX8C-60P-SV Datasheet, PDF (2/11 Pages) Hirose Electric – 0.6mm Pitch Stacking Height 3mm to 16mm Connector

FX8C Series
sProduct Specifications
Rating
Current rating 0.4A
Operating Temperature Range -55ç to +85ç Note 1. Storage Temperature Range -10ç to +60ç Note 2.
Voltage rating 100V AC Operating Humidity Range -40% to 80%
Storage Humidity Range 40% to 70%
Item
Specification
Condition
1. Insulation Resistance 100M ohms min.
250V DC
2. Withstanding voltage No flashover or insulation breakdown.
300V AC/1 minute
3. Contact Resistance 80m ohms max.
100mA
4. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Humidity (Steady state) Contact resistance: 100m ohms max.Insulation resistance: 100M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle Contact resistance: 100m ohms max.Insulation resistance: 100M ohms min. (-55ç: 30 minutes, 15 to 35ç: 2 to 3 minutes
(-85ç: 30 minutes, 15 to 35ç: 2 to 3minutes) 5 cycles
7. Durability (Mating/un-mating) Contact resistance: 100m ohms max.
50 cycles
8. Resistance to Soldering heat No deformation of components affecting performance. Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Part
Insulator
Header Contact
Material
PBS
Phosphor bronze
Finish
Light brown
Contact area
Lead area
Gold plated
Tin-lead plated
Remarks
UL94V-0
–––––––
Receptacle Contact
Phosphor bronze
Contact area
Lead area
Gold plated
Tin-lead plated
–––––––
Note : The black dots on the insulater will not affect performance.
sOrdering Information
qSingle Product
FX8C - 120 P - SV 1 ⁽²²⁾
q
we
rt y
q Series Name : FX8C
w Number of Contacts :60, 80, 90, 120, 140
e Connector type
P :Header
t Product height variation Blank : Standard (Minimum low profile)
1: +1mm ^{. . . . . .} 3:+3mm
y Packaging Type
S :Receptacle
Blank: Tray packaging
r Contact type SV :Board vertical type
(21) : Tube packaging
(22) : Embossed tape package
*The embossed tape packaging product is 60 and 80 contacts only.
*The packing of the FX8C-**P-SV6 type is the tray packaging and the tube packaging only.
qtwo-piece Connection Product _{FX8C - 120/120 P 11 - SV 1 J}
q
w
er
t yu
q Series Name :FX8C
r Connector to Connector Pitch
w Number of Contacts: 60∞2, 80∞2, 90∞2, t Contact type SV : Board vertical type
100∞2, 120∞2, 140∞2 y Product Height VariationBlank : Standard (Minimum lot profile)
Example: 120/120 = 240 contacts
1:+1mm ^{. . . . . .} 3:+3mm
e Connector Type : P : Header
u J: two-piece connection product
S : Receptacle
*The standard packaging of the two-piece connection product is the tray packaging.
A237