FX5-20P-SH Datasheet, PDF (2/7 Pages) Hirose Electric – 1mm Pitch Connector for Vertical Connection

sProduct Specifications
Rating
Current rating 0.5A
Operating Temperature Range -55ç to +85ç (Note 1) Storage Temperature Range -10ç to +60ç (Note 2)
Voltage rating 100V AC Operating Humidity Range 40% to 80%
Storage Humidity Range 40% to 70%
Item
Specifications
Condition
1. Insulation Resistance 100M ohms min.
250V DC
2. Withstanding voltage No flashover or insulation breakdown.
300V AC/1 minute
3. Contact Resistance 50m ohms max.
100mA
4. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Moisture Resistance Contact resistance: 60m ohms max. Insulation resistance: 100M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle
Contact resistance: 60m ohms max.
Insulation resistance: 100M ohms min.
(-55ç: 30 minutes, 15 to 35ç: 2 to 3 minutes
(-85ç: 30 minutes, 15 to 35ç: 2 to 3minutes) 5 cycles
7. Durability (Mating/un-mating) Contact resistance: 60m ohms max.
500 cycles
Reflow: At the recommended temperature profile
8. Resistance to Soldering heat No deformation of components affecting performance.
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Part
Insulator
Header Contact
Receptacle Contact
Material
Polyamide
Brass
Phosphor bronze
Note : The black dots on the insulater will not affect performance.
Finish
Beige
Contact area : Gold plated
Lead area : Tin-lead plated
Remarks
UL94V-0
________
________
sOrdering Information
qHeader
FX5 – * P – SH 3
q
we
rt
qReceptacle
q Series Name
: FX5
w Number of Contacts : 20, 40, 52, 56, 68, 80
e Connector Type P: Header
r Contact type
SH : Right angle SMT type
t Connector Height
Blank : 6.5mm
3
: 9.5mm
Note: The 56 contact header is for SH 3 type only.
FX5 – * S 2 A – DSA L
q
we r t
y
u
q Series Name
: FX5
w Number of Contacts : 20, 40, 52, 56, 68, 80
e Connector Type S: Receptacle
r Contact Sequence
2
: 2 Stages Sequence
t Serial No. : A
y Contact type
DSA
: Straight through hole type
u Board prefixed pin
Blank
: Without board prefixed pin
L
: With board Prefixed pin
A207