FH34S-6S-0.5SH50 Datasheet, PDF (2/12 Pages) Hirose Electric – 0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

FH34(S)Seriesq0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
sSpecifications
Ratings
Current rating 0.5 A (Note 1)
Voltage rating 50 Vrms AC
Operating temperature range:
-55 to +85°C (Note 1)
Operating humidity range:
Relative humidity 90% max. (No condensation)
Storage temperature range:
-10 to +50°C (Note 2)
Storage humidity range:
Relative humidity 90% max. (No condensation)
Recommended FPC/FFC Thickness: 0.3 ± 0.03 mm, Gold plated contact pads
Item
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
4. Durability
5. Vibration
6. Shock
7. Humidity (Steady state)
8. Temperature cycle
9. Resistance to soldering heat
Specification
500 Mø min.
No flashover or insulation breakdown
100 mø max.
* Including FPC and FFC conductor resistance
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
No electrical discontinuity of 1µs or longer
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
No electrical discontinuity of 1µs or longer
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation
No deformation of components affecting performance
Conditions
100 V DC
250 Vrms AC / one minute
1 mA, AC / DC 20mV max (AC: 1kHz)
20 cycles
Frequency: 10 to 55 Hz, single amplitude of 0.75
mm, 10 cycles in each of the 3 axis
Acceleration of 981m/s², 6 ms duration, sine half-
wave, 3 cycles in each of the 3 axis
96 hours at 40°C and humidity of 90 to 95%
Temperature : -55°C / +15°C to +35°C/+85°C / +15°C to +35°C
Time:
5 cycles
30 / 2 to 3 / 30 / 2 to 3 minutes
Reflow: At the recommended temperature profile
Manual soldering: 350°C ±5°C for 5 seconds (Note 3)
Note1: When passing the current through all of the contacts, use 70% of the rated current.
Note2: Includes temperature rise caused by current flow.
Note3: The term "storage" refers to products stored for a long period prior to mounting and use.
The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or
during transportation after board mounting.
Note4: Information contained in this catalog represents general requirements for this Series.
Contact us for the drawings and specifications for a specific part number shown.
sMaterials
Part
Insulator
Contacts
Metalfittings
Material
LCP
PA
LCP(8pos.)
Phosphor bronze
Phosphor bronze
Finish
FH34S series
FH34SJ series
Color:Beige
FH34SW series
FH34SR series
FH34SRJ series
Color:Gray
FH34S series
FH34SJ series
FH34SR series
Color:Black
FH34SRJ series
FH34SW series
Color:Light brown
FH34SJ series
FH34SR series
Color:Black
Gold plating with nickel barrier
Pure tin reflow plating
Remarks
UL94V-0
UL94HB
UL94V-0
-------
-------
sOrdering information
FH 34S J - 30S - 0.5 SH ⁽⁵⁰⁾
1
23
4
1 Series name : FH
2 Series No. : 34S
3 Blank : Standard
J
: Top contact, Halogen-free
(Flame retardance UL94V-0).
W : Top contact, Halogen-free
(Flame retardance UL94HB).
R : Bottom contact
RJ : Bottom contact, halogen-free
(Flame retardance UL94V-0).
5
6
7
4 Number of positions : 4 to 34
5 Contact pitch : 0.5mm
6 Termination type
SH : SMT horizontal mounting type
7 Plating specifications
(50)…Gold plating with nickel barrier
2