English
Language : 

C4650 Datasheet, PDF (2/11 Pages) Hirose Electric – Interface Connectors for Miniature, Portable Terminal Devices
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHSS TproSduecrtsiehsa●veIbneteenrdfisacconetinCueodn, onrewcilltboerdsisfcoonrtinMueidnsiaootnu. rPele,asPeochretcakbthlee pTreodrumctsinstaaltuDs oenvtihceeHsirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
■Specifications
Rating
Current rating
Voltage rating
0.5A (1 A max. can be carried via 4 random contacts) Operating temperature range : -30ç to +80ç
100V AC
Storage temperature range : -40ç to +85ç (Note)
Characteristic
Specification
Conditions
11. Contact resistance 60m ø max.
12. Insulation resistance 100M ø min.
100mA DC
250V DC
13. Dielectric withstanding voltage No flashover or insulation breakdown.
350V AC/ one minute
14. Mating/un-mating forces Mating: 29.4N max.
With corresponding connector.
15. Durability
Contact resistance: 50 m ø max.
(mating/un-mating)
10000 cycles
16. Shock
17. Temperature cycle
18. Salt spray
19. Lock strength
No electrical discontinuity of 10 μ sec. max.
Acceleration of 490 m/s2, 11 ms duration, sine half-wave
Contact resistance: 100m ø max.
waveform, 3 cycles in each of the 3 axis.
Contact resistance: 100m ø max.
Insulation resistance: 1000M ø min.
Temperature : -55ç ➝ +5ç to +35ç ➝ +85ç ➝ +5ç to +35ç
Time (Minutes) : -30 ➝ +5
➝ +30 ➝ +5
5 cycles
No corrosions
5±1% salt water solution at 35±3ç for 48 hours, after
washing without salt, leave for 24 hours at room temperature
Fully inserted and locked corresponding connector. No Pull force: 49N max. applied in each of the 3 axis.
physical damage or electrical failure.
10. Shock
No electrical discontinuity of 10 μ sec. max. Contact Frequency: 10 to 55 Hz, single amplitude of 0.75mm, 2 hours,
resistance: 100m ø max.
3 axis.
Note: Includes temperature rise caused by current flow.
■Materials
● Receptacles and cradles
Component
Insulator
Contacts
Shield
● Plugs
Component
Insulator
Contacts
Shield
Cover
Material
Thermoplastic compound, glass reinforced
Copper alloy
Stainless steel
Material
Thermoplastic compound, glass reinforced
Copper alloy
Stainless steel
Thermoplastic compound, glass reinforced
Finish
Color: Black
Contact area: Gold plated
Tin alloy plating
Finish
Color: Black
Contact area: Gold plated
-------------------
-------------------
Remarks
UL94V-0
-------------------
-------------------
Remarks
UL94V-0
-------------------
-------------------
UL94-HB
■Ordering information
● Receptacles
ST 60 - 18 P /4 (50)
1
2
4 56
8
● Plugs
ST 40 X - 18 S - CVR (80)
1
23
45
7
8
● Plug - Cradle type
ST 80 X - 18 S (50)
1
23
45 8
1 Series name
: ST
2 Termination type
60
: Right angle SMT
40
: Solder type
80
: Cradle, vertical, SMT
3 Shield
X
: With shield
Blank
: Without shield
4 Number of positions
5 Contact type
P
: Male contact (Receptacle)
S
: Female contact (Plug)
6 Contact arrangement /4
: Combination, with 4 power contacts
7 Plug type
CV
: Standard type, for top PCB mount
CVR
: Reverse type, for bottom PCB mount
CV1
: For larger diameter cables
8 RoHS compliant : (50), (80)
2