MMCX-LP-FHSB Datasheet, PDF (1/8 Pages) Hirose Electric – Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)

Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)
MMCX Series
RRiigghhtt--aannggllee RReecceeppttaaccllee
RRiigghhtt--aannggllee RReecceeppttaaccllee ++ SSttrraaiigghhtt PPlluugg
sFeatures
1. Snap-on coupling mechanism makes it easy to
engage and disengage.
The rugged snap-on interface which uses no slotting in the outer
conductor maintains mechanical stability by allowing constant
mating force and rotation without degradation of electrical
performance.
2. Low Profile accommodates PCMCIA type 2 cards
The MMCX-LR-SMT with a height of only 3.51mm can be mounted
on the bottom of the type 2 card. For installation on the PCB
surface, the connector has a 0.36mm offset from the card centerline,
which allows the card center axis to coincide with the connector
center axis.
3. Designed for ultra thin cable
Industry Standard RG-type coaxial cable
··· RG-178B/U (Ø1.8)
··· RG-316/U (Ø2.59 max.)
Ø1.48 single shielded cable (one of the smallest available)
··· DFSS111-U1979 (Ø1.48) made by Junkosha Inc.
··· CO-6F·FH-SB (Ø1.48) made by Hitachi Cable Ltd.
··· RF-MF507 (Ø1.48) made by Nissei Electric Co., Ltd.
4. Cable Assemblies with multiple design options
By using Ø1.48 single shielded cable, the opposite end of the
assembly can be connected with N, BNC, HRM (SMA type), TNC
and H.FL series.
5. Matched Excellent Impedance
The interface is slotless to minimize RF leakage. High frequency
characteristics achieve a maximum voltage standing-wave ratio
(VSWR) of 1.2 at DC-6GHz (typical value, that is not applicable to
all products).
6. Compatibility
Mates will all industry standard MMCX connectors.
RRiigghhtt--aannggllee RReecceeppttaaccllee ++ RRiigghhtt--aannggllee PPlluugg
VVeerrttiiccaall RReecceeppttaaccllee
VVeerrttiiccaall RReecceeppttaaccllee ++ SSttrraaiigghhtt PPlluugg
VVeerrttiiccaall RReecceeppttaaccllee ++ RRiigghhtt--aannggllee PPlluugg
B31