DF60 Datasheet, PDF (1/12 Pages) Hirose Electric – 65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply

65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply
DF60 Series
(UL, C-UL, TÜV certified product)
Jc^fjZadX`^c\bZX]Vc^hb^h
XdciV^cZY^ch^YZi]Z]ZVYZg
HdX`ZiVcY]ZVYZg
YZh^\cVkd^Yh
h]dgi"X^gXj^iWZilZZc
VY_VXZciXdciVXih#
<j^YZ`ZnhegZkZci
^cXdggZXi^chZgi^dc
■Features
1. High current capacity
Capable of going to a max. of 65A when using
8 AWG with the single position connector.
(Please refer to the chart for the rated current in
other pin counts.)
2. Secure lock mechanism ensures
complete mating
A secure lock mechanism with a clear tactile and
audible click prevents insufficient mating. (Fig.2)
3. Highly reliable 5-point contact structure
Three independent contact springs provide a
secure contact with high contact reliability using
5-point of contact. (Fig.3)
4. Molded lance design
The lance is actually part of the housing instead of
being part of the terminal. This prevents tangled
wires during assembly.
5. Mis-insertion prevention for headers
The addition of a molded pin on the header allows
temporary mounting retention and prevents
reverse mounting on the PCB. (Fig.1).
(Right angle pin header has a metal fitting for this
purpose)
6. Prevention of solder cracks
Glass-reinforced resin is used on pin header to
prevent solder cracks due to thermal contraction.
7. Design Prevents short-circuits between
contacts
The wall structure between contacts isolates the
contacts and prevents short circuits from occuring.
(Fig.1)
8. Compliant to UL, C-UL and TÜV specifications
9. Glow Wire compliance(Compliant with IEC
60695-2-11)
BdaYZYe^ch\^kZV
iZbedgVgn]daYVcY
VhhjgZegdeZgdg^ZciVi^dc
d[i]ZXdccZXidg#
● Lock structure
ʦ6"6ʧ
6
6
Fig.1
8g^beXdciVXi
AdX`eVgihd[
i]Zeaj\VcY
]ZVYZghiVgi
idZc\V\Z#
CdXdciVXinZi#
=ZVYZgXdciVXi
Fig.2
Three independent spring contacts provide a secure contact and a
high contact reliability with 5-points of contact.
Fig.3
2017.1e
1