|
HDD16M64D8W Datasheet, PDF (1/10 Pages) Hanbit Electronics Co.,Ltd – DDR SDRAM Module 128Mbyte (16Mx64bit), based on16Mx8,4Banks, 4K Ref., DIMM, | |||
|
HANBit
HDD16M64D8W
DDR SDRAM Module 128Mbyte (16Mx64bit), based on16Mx8,4Banks,
4K Ref., DIMM,
Part No. HDD16M64D8W
GENERAL DESCRIPTION
The HANBiT HDD16M64D8W is 16M bit x 64 Double Data Rate SDRAM high density memory modules. The HANBiT
HDD16M64D8W consists of eight CMOS 16M x 8 bit with 4banks Double Data Rate SDRAMs in 66pin TSOP-II(400mil) packages
mounted on a 184pin glass-epoxy substrate. Four 0.1uF decoupling capacitors are mounted on the printed circuit board in parallel
for each DDR SDRAM. The HDD16M64D8W is Dual In-line Memory Modules and intended for mounting into 184pin edge
connector sockets. Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are
possible on both edges of DQS. Range of operating frequencies, programmable latencies and burst lengths allow the same device
to be useful for a variety of high bandwidth, high performance memory system applications.
FEATURES
⢠Part Identification
HDD16M64D8W â 10A : 100MHz (CL=2)
HDD16M64D8W â 13A : 133MHz (CL=2)
HDD16M64D8W â 13B : 133MHz (CL=2.5)
⢠Power supply : VDD: 2.5V ± 0.2V, VDDQ: 2.5V ± 0.2V
⢠Double-data-rate architecture; two data transfers per clock cycle
⢠Bidirectional data strobe(DQS)
⢠Differential clock inputs(CK and CK)
⢠DLL aligns DQ and DQS transition with CK transition
⢠Programmable Read latency 2, 2.5 (clock)
⢠Programmable Burst length (2, 4, 8)
⢠Programmable Burst type (sequential & interleave)
⢠Edge aligned data output, center aligned data input
⢠Auto & Self refresh, 7.8us refresh interval(8K/64ms refresh)
⢠Serial presence detect with EEPROM
⢠PCB : Height 1250 mil, double sided component
URL : www.hbe.co.kr
REV 2.0 (November.2002)
1
HANBit Electronics Co.,Ltd.
|
▷ |