S11071-1004_15 Datasheet, PDF (9/10 Pages) Hamamatsu Corporation – CCD image sensors

CCD image sensors
S11071/S10420-01 series
Precautions (electrostatic countermeasures)
・ Handle these sensors with bare hands or wearing cotton gloves. In addition, wear anti-static clothing or use a wrist band with an
earth ring, in order to prevent electrostatic damage due to electrical charges from friction.
・Avoid directly placing these sensors on a work-desk or work-bench that may carry an electrostatic charge.
・Provide ground lines or ground connection with the work-floor, work-desk and work-bench to allow static electricity to discharge.
・Ground the tools used to handle these sensors, such as tweezers and soldering irons.
It is not always necessary to provide all the electrostatic measures stated above. Implement these measures according to the
amount of damage that occurs.
Related information
www.hamamatsu.com/sp/ssd/doc_en.html
Precautions
∙ Notice
∙ Image sensors/Precautions
Technical information
∙ FFT-CCD area image sensor/Technical information
Driver circuits for CCD image sensor (S10420-01/S11071 series) C11287/C11288 [sold separately]
The C11287, C11288 are driver circuits designed for HAMAMATSU CCD image sensors S10420-01/S11071 series. The C11287, C11288
can be used in spectrometers, etc. when combined with the CCD image sensor.
Features
Built-in 14-bit A/D converter
Interface to computer: USB 2.0
Power supply: USB bus power operation (C11287)
DC+5 V operation (C11288)
C11287
C11288
9