S12551-2048_15 Datasheet, PDF (8/8 Pages) Hamamatsu Corporation – CCD linear image sensor

CCD linear image sensor
S12551-2048
Precautions
Electrostatic countermeasures
O _{Handle these sensors with bare hands or wearing cotton gloves. In addition, wear anti-static clothing or use a wrist band with an}
earth ring, in order to prevent electrostatic damage due to electrical charges from friction.
O _{Avoid directly placing these sensors on a work-desk or work-bench that may carry an electrostatic charge.}
O _{Provide ground lines or ground connection with the work-floor, work-desk and work-bench to allow static electricity to discharge.}
O _{Ground the tools used to handle these sensors, such as tweezers and soldering irons.}
It is not always necessary to provide all the electrostatic measures stated above. Implement these measures according to the amount
of damage that occurs.
When UV light irradiation is applied
When UV light irradiation is applied, the product characteristics may degrade. Such examples include degradation of the product’s UV
sensitivity and increase in dark current. This phenomenon varies depending on the irradiation level, irradiation intensity, usage time,
and ambient environment and also varies depending on the product model. Before employing the product, we recommend that you
check the tolerance under the ultraviolet light environment that the product will be used in.
Related information
www.hamamatsu.com/sp/ssd/doc_ja.html
Precautions
∙ Disclaimer
∙ Image sensors
Information described in this material is current as of September, 2015.
Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the
information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always
contact us for the delivery specification sheet to check the latest specifications.
The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that
one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use.
Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: [phone], Fax: [phone]
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: [phone], Fax: [phone]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: [phone], Fax: [phone]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: [phone], Fax: [phone]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: [phone], Fax: [phone]
North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: [phone], Fax: [phone]
Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: [phone], Fax: [phone]
China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: [phone], Fax: [phone]
8
Cat. No. KMPD1147E03 Sep. 2015 DN