C8061 Datasheet, PDF (8/11 Pages) Hamamatsu Corporation – Designed for InGaAs linear image sensor

InGaAs multichannel detector head C8061/C8062-01
s Pin assignment of “TE control I/O” connector
9-pin D-sub connector
5 4 3 21
9 8 76
KACCC0075EA
Pin No. Terminal name
Description
1
VD2 (+6V) Power supply.
2
Temp Monitor Analog output signal of the temperature of the InGaAs image sensor.
Digital input signal for starting to cool down.
3
Cooling control
HCMOS compatible.
H-level or left open : cooling
L-level
: stand-by
4
Vp (+6V) Power supply for the thermoelectric cooler in the InGaAs image sensor.
5
VF (+12 V) Power supply for cooling fan.
6
D. GND
Ground.
7
D. GND
Ground.
8
P. GND
Power supply return of the thermoelectric cooler mounted in the InGaAs image sensor.
9
F. GND
Ground return for cooling fan.
Note: Available for using same power supply (+6 V) for “VD2” and “VP”.
Caution: Do not connect “VD2” and “VP” together on the backside of the 9-sub D-sub connector.
These may be connected (shorted) at the power supply end, not 9-pin D-sub connector.
8