C8061 Datasheet, PDF (7/11 Pages) Hamamatsu Corporation – Designed for InGaAs linear image sensor

InGaAs multichannel detector head C8061/C8062-01
s Pin assignment of “signal I/O” connector
15-pin D-sub connector
8 7 6 5 4 3 21
15 14 13 12 11 10 9
KACCC0069EA
Pin No. Terminal name
Description
Digital Input signal used to select conversion gain of charge amplifier in InGaAs image sensor.
1
Cf SEL
HCMOS compatible
High level or left open: Low gain (0.3 V/pc)
Low level: High gain (6 V/pc)
2
Data video *
Analog video output
Positive polarity (Typ. 10 V)
3
VA1+ (+15 V) Analog power supply
4
VA1- (-15 V) Analog power supply
5
VD1 (+5 V) Digital power supply
6
Start
Digital input signal for initializing the circuit
HCMOS compatible. Positive logic
Digital input signal for operating the circuit
7
CLK
HCMOS compatible
Rising edge operation
Digital input signal for indicating end-of-scan of the image sensor
8
EOS
HCMOS compatible
Negative logic
9
A. GND
Analog ground
10
A. GND
Analog ground
11
NC
No Connection
12
D. GND
Digital ground
13
D. GND
Digital ground
14
D. GND
Digital ground
Digital output signal for A/D conversion
15
Trigger
HCMOS compatible
Positive logic
* Depending on the individual sensor to install, some channels might have a dark output lower than ground potential so use a
bipolar A/D converter.
7