S10077_15 Datasheet, PDF (7/8 Pages) Hamamatsu Corporation – CMOS linear image sensor

CMOS linear image sensor
S10077
Dimensional outline (unit: mm)
Photosensitive area
14.336
7.168 ± 0.3
24
a
Photosensitive
surface
13
1.35 ± 0.2*¹
1.4 ± 0.2*²
1
a’
12
1 ch
41.6 ± 0.2
Direction of scan
2.54
0.51
27.94
6.83 ± 0.2
0.5 ± 0.05*³
a-a’ cross section
Tolerance unless otherwise noted: ±0.1
*1: Distance from window upper surface
to photosensitive surface
*2: Distance from package bottom
to photosensitive surface
*3: Glass thickness
KMPDA0202EE
Pin connections
Pin no.
Symbol I/O
Discription
Pin no.
Symbol I/O
Discription
1
NC
No connection
13
NC
2
D.Trig
O Trigger signal for digital output
14
NC
No connection
No connection
3
DO
O Digital output
15
NC
No connection
4
A.Trig
O Trigger signal for analog output
16
EOS
O End of scan signal
5
AO
O Analog output
17
EOC
O Digital conversion end signal
6
NC
No connection
18
NC
No connection
7
NC
No connection
8
Vdd
I Supply voltage
19
Vsel
I A/D mode selection voltage
20
Vss
I GND
9
Vss
I GND
21
Vdd
I Supply voltage
10
NC
11
NC
No connection
No connection
22
CLK
I Clock signal
23
ST
I Start signal
12
NC
No connection
24
NC
No connection
Note: Leave the “NC” terminals open and do not connect them to GND.
When using the analog output terminal, connect a buffer amplifier for impedance conversion to it so as to minimize the current
flow. As the buffer amplifier, use a high input impedance operational amplifier with JFET or CMOS input.
7