C9732DK-11 Datasheet, PDF (7/9 Pages) Hamamatsu Corporation – For soft X-ray imaging, cassette type with USB 2.0 interface Large photodiode area: 120 × 120 mm

Flat panel sensor
C9732DK-11
Dimensional outline (unit: mm, tolerance: ±1 mm unless otherwise noted)
Dimensional outline (C9732DK-11, unit: mm)
CMOS FLAT PANEL SENSOR C9732DK-11
Active area 118.4
(2367, 2339)
(0, 0)
14.5
7
Screw hole *
9
8.1
Screw *
hole
261 ± 0.5
(6 ×) M3 depth 4
73
266
C1.3
Top cover material including window is carbon fiber (1.0 mm thickness).
Weight: 1.2 kg
* M3 screw hole for fixing USB plug to flat panel sensor.
The depth of the hole: 7 mm
166 ± 0.5
50 ± 0.5
KACCA0277EA
Notice
· Do not subject the flat panel sensors to strong vibration or shock (Strong shock such as drop impacts may cause permanent damage
to these sensors).
· Users must take responsibility for implementing X-ray shielding safety measures to avoid the risk of X-ray exposure.
· Data listed in this datasheet is defined at the time of shipment. Characteristics may vary somewhat due to exposure to X-rays so take
proper countermeasures such as making periodic image correction.
· This product is warranted for a period of 12 months after the date of the shipment. The warranty is limited to replacement or repair of
any defective product due to defects in workmanship or materials used in manufacture. The warranty does not cover loss or damage
caused by natural disaster, misuse (including modifications and any use not complying with the environment, application, usage and
storage conditions described in this datasheet), or total X-ray radiation dose over 45000 R (390 Gy) even within the warranty period
[incident X-ray energy: less than 35 kVp (17 keV Mo source)].
7