C7942CA-02 Datasheet, PDF (6/6 Pages) Hamamatsu Corporation – Acquire digital X-ray image in real time and 170 & 176 mm diagonal size

Flat panel sensor C7942CA-02, C7943CA-02
s Notice
· Do not subject the Flat Panel Sensors to strong vibration or shock. (Strong shock such as drop impacts may cause permanent
damage to these sensors.)
· Users must take responsibility for implementing X-ray shielding safety measures to avoid the risk of X-ray exposure.
· Data listed in this datasheet is defined at the time of shipment. Characteristics may vary somewhat due to exposure to X-rays
so take proper coutermeasures such as making periodic image correction.
· This product is warranted for a period of 12 months after the date of the shipment.
The warranty is limited to make a replacement or repair of any defective product due to defects in workmanship or materials used
in manufacture. The warranty does not cover loss or damage caused by natural disaster, misuse (including modifications and
any use not complying with the environment, application, usage and storage conditions described in this datasheet), or total
radiation dose over 1 million Roentgen (less than 100 kVp) even within the warranty period.
· As described above, flat panel sensors have limited resistance to radiation. This must be taken into account when using a flat
panel sensor under continuous irradiation (in-line non-destructive inspection, etc.)
When using flat panel sensors in non-destructive inspection equipment, please contact us and provide information such as
irradiation conditions.
C7942CA-02, C7943CA-02 conforms to European EMC directives:
EN61326 Class A.
s Optional frame grabber cables
Frame grabber
Cable type No.
Cable length
Cable end
A8406-31
5m
General-purpose
A8406-36
A8406-37
7m
10 m
A8406-38
A8406-32
12 m
5m
TX20A-36PH1-D2P1-D1E *⁸
IMAQ PCI-1424 *⁷
A8406-33
A8406-34
7m
10 m
A8406-35
12 m
*7: Made by NI (National Instruments Corporation)
*8: Made by JAE (Japan Aviation Electronics Industry, Limited)
*9: Made by Honda Tsushin Kogyo Co. Ltd.
Note: The detailed information for these optional cable is shown in the datasheet of A8406 series.
Cable end
open
PCS-XE100MA+ *⁹
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: [phone], Fax: [phone], www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: [phone], Fax: [phone]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: [phone], Fax: [phone]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: [phone], Fax: [phone]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: [phone], Fax: [phone]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: [phone], Fax: [phone]
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: [phone], Fax: [phone]
Cat. No. KACC1098E09
6
May 2007 DN