S12571-010_15 Datasheet, PDF (5/6 Pages) Hamamatsu Corporation – Low afterpulses, wide dynamic range, for high-speed measurement Photosensitive area: 1 x 1 mm

MPPC (multi-pixel photon counter)
Connection example
+V
0.1 μF
1 kΩ
S12571-010, -015C/P
MPPC
Amplifier
Signal
KAPDC0024EB
Measured example of temperature profile with our hot-air reflow oven for product testing
300 °C
240 °C max.
220 °C
190 °C
170 °C
Preheating
70 to 90 s
Actual heating
40 s max.
Time
KPICB0171EA
∙ This product supports lead-free soldering. After unpacking, store it in an environment at a temperature of 25 °C or less and a humidity
of 60% or less, and perform soldering within 24 hours.
∙ This effect that the product receives during reflow soldering varies depending on the circuit board and reflow oven that are used. Be-
fore actual reflow soldering, check for any problems by testing out the reflow soldering methods in advance.
Precautions
∙ If necessary, incorporate appropriate protective circuits in power supplies, devices, and measuring instruments to prevent overvoltage
and overcurrent.
5