C9728DK-10_15 Datasheet, PDF (5/9 Pages) Hamamatsu Corporation – For diffraction, cassette type with USB 2.0 interface Photodiode area: 52.8 x 52.8 mm

Flat panel sensor
C9728DK-10
[Table 1] Pin assignment and cable color for 9-pin power receptacle
Pin no.
1
Color
Yellow
2
Blue
3
Gray
4
Black
5
Red
6
Green
7
Purple
8
White
9
Brown
9-pin receptacle: DE-9PF-N made by JAE (Japan Aviation Electronics Industry, Limited)
Mating plug: JST J-C9-2C made by J.S.T Mfg. Co., Ltd.
Signal
Digital GND
Digital GND
Analog GND
Analog GND
Analog GND
Digital +5 V
Digital +5 V
Analog +5 V
Analog +5 V
[Table 2] Pin assignment and color cable for 4-pin trigger cable
Pin no.
Color
1
Blue
2
Orange
3
Green
4
Brown
4-pin receptacle: ECG. 0B. 304. CLL made by LEMO S.A.
Mating plug: FGG. 0B. 304. CLAD56 made by LEMO S.A.
Signal
TrgIn
Digital GND
TrgOut
Digital GND
Note
Twist pair
Twist pair
[Table 3] Trigger mode
Trigger mode
External trigger mode
Internal trigger mode
TrgIn (See Table 2)
Rectangular signal
High or Open
Note
The integration time is controlled through Lemo 4-pin trigger cable.
The integration time is controlled by DCAM command without Lemo
4-pin trigger cable.
[Table 4] Trigger mode selection by DCAM-API
Function: BOOL dcam_setpropertyvalue(HDCAM h, int32 iProp, double fValue);
Trigger mode
iProp
External trigger mode
DCAM_IDPROP_TRIGGERSOURCE
Internal trigger mode
Internal trigger mode
(exposure time)
DCAM_IDPROP_TRIGGERSOURCE
DCAM_IDPROP_EXPOSURETIME
Note: The iProp which is not indicated in this table cannot be used.
fValue
DCAMPROP_TRIGGERSOURCE__EXTERNAL
DCAMPROP_TRIGGERSOURCE__INTERNAL
Exposuretime(sec)
5