C9728DK-10_15 Datasheet, PDF (4/9 Pages) Hamamatsu Corporation – For diffraction, cassette type with USB 2.0 interface Photodiode area: 52.8 x 52.8 mm

Flat panel sensor
C9728DK-10
Accessories
O Power cable (terminated with a JSTJ-C9-2C plug at one end and open at the other end; 2 m; see Table 1.)
O Trigger cable (terminated with an FGG.0B.304.CLAD56 plug at one end and open at the other end; 5 m; see Table 2.)
O Earth cable (AWG; 4 m)
System requirements
To operate the C9728DK-10 at full performance, the following system and peripherals are required.
O PC (recommended system requirements)
· PC: Precision T5600 standard model (Dell)
· OS: See “Compatibility Note.pdf” in “http://www.dcamapi.com”.
· CPU: Intel^®Xenon^® Processor E5-2620
(15 M Cache, 2.00 GHz, 7.20 GT/s Intel^® QPI)
· Memory: 4 GB (2 GB × 2) for 32-bit OS
8 GB (2 GB × 4) for 64-bit OS
DDR RDIMM memory (1600 MHz, ECC)
· Microsoft.net Framework: Version 2.0 and later
O Power source: A.vdd = +5.0 ± 0.1 V (600 mA), D.vdd = +5.0 ± 0.1 V (900 mA)
· The voltages described above are specified at the flat panel sensor side.
· Please use a low noise series power supply. (Avoid using a switching power supply.)
· Install a noise filter on the AC power input line to prevent surges on the AC line.
· Always ground the ground terminal to avoid the effects of noise from peripheral devices.
O DCAM-API (digital camera application programming interface): produced by Hamamatsu
· The driver software, DLL are included in DCAM-API. DCAM-SDK which includes function manuals and sample software can be
provided to OEM users.
· The latest version of DCAM-API can be downloaded from “http://dcam-api.com”.
O USB cable: mini-B type
4