S10226-10_15 Datasheet, PDF (4/8 Pages) Hamamatsu Corporation – CMOS linear image sensor

CMOS linear image sensor
S10226-10
Timing chart
1/f(CLK)
CLK
ST
tpi(ST), Integration time
Video
Trig
EOS
tr(CLK)
tf(CLK)
CLK
1/f(CLK)
tr(ST)
tf(ST)
ST
tvd
Video
KMPDB0164EC
Parameter
Symbol
Min.
Typ.
Start pulse interval
tpi(ST)
4104/f(CLK)
-
Start pulse rise and fall times
tr(ST), tf(ST)
0
20
Clock pulse duty ratio
-
40
50
Clock pulse rise and fall times
tr(CLK), tf(CLK)
0
20
Video delay time*⁶
tvd
10
20
*6: Ta=25 °C, Vdd=5 V, V(CLK)=V(ST)=5 V
Max.
Unit
-
s
30
ns
60
%
30
ns
30
ns
Note: The CLK pulse should be set from high to low just once when the ST pulse is low. The internal shift register starts operating at
this timing.
The storage time is determined by the start pulse intervals. However, since the charge storage of each pixel is carried out
between the signal readout of that pixel and the next signal readout of the same pixel, the start time of charge storage differs
depending on each pixel. In addition, the next start pulse cannot be input until signal readout from all pixels is completed.
4