S10226-10_15 Datasheet, PDF (1/8 Pages) Hamamatsu Corporation – CMOS linear image sensor

CMOS linear image sensor
S10226-10
Small, resin-sealed CMOS image sensor
The S10226-10 is a resin-sealed CMOS linear image sensor to offer compact size and high cost-performance compared to
our previous product (S9226 series).
Features
Compact and high cost-performance
Surface mount type package: 2.4 × 9.1 × 1.6^t mm
Pixel pitch: 7.8 μm
Pixel height: 125 μm
1024 pixels
Single 3.3 V power supply operation
High sensitivity, low dark current, low noise
On-chip charge amplifier with excellent input/output
characteristics
Built-in timing generator allows operation with only
Start and Clock pulse inputs.
Video data rate: 200 kHz max.
Spectral response range: 400 to 1000 nm
Applications
Barcode readers
Displacement meters
Refractometers
Interferometers
Miniature spectrometers
Structure
Parameter
Number of pixels
Pixel pitch
Pixel height
Photosensitive area length
Package
Seal material
Specification
Unit
1024
-
7.8
μm
125
μm
7.9872
mm
Glass epoxy
-
Silicone resin
-
Absolute maximum ratings
Parameter
Symbol Condition
Value
Unit
Supply voltage
Vdd Ta=25 °C
-0.3 to +6
V
Gain selection terminal voltage Vg Ta=25 °C
-0.3 to +6
V
Clock pulse voltage
V(CLK) Ta=25 °C
-0.3 to +6
V
Start pulse voltage
V(ST) Ta=25 °C
-0.3 to +6
V
Operating temperature*¹
Topr
-25 to +85
°C
Storage temperature*¹
Tstg
-25 to +85
°C
Reflow soldering conditions*²
Tsol
Peak temperature 260 °C, 3 times (See P.7)
-
*1: No condensation
*2: JEDEC level 2a
Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the
product within the absolute maximum ratings.
www.hamamatsu.com
1