C13053MA_15 Datasheet, PDF (4/9 Pages) Hamamatsu Corporation – Mini-spectrometer

Mini-spectrometer
FT series C13053MA
Connection example (transmitted light measurement)
Spectrum data can be acquired by guiding measurement light into a mini-spectrometer through an optical fiber and transferring the measured re-
sults to a PC via the USB connection. Since there are no moving parts inside the device, constantly stable measurements can be expected. More-
over, the optical guiding section uses an optical fiber making connection to the measured object flexible.
PC
UV-visible fiber light source
(deuterium lamp + halogen lamp)
L10290
USB
cable
Mini-spectrometer
Fiber
Quartz cell
(for holding liquid sample)
KACCC0767EA
Trigger operation modes
In the C13053MA, the following trigger operation modes are available. You can switch between these modes from the evaluation software sup-
plied with the C13053MA.
(1) Asynchronous data measurement at software trigger input (2) Synchronous data measurement at software trigger input
The first piece of digital data that is converted after a software trigger
is applied from the PC is acquired.
Charge integration
Charge readout
(A/D conversion)
Software trigger
Measurement cycle
Software trigger
Digital data
KACCC0503EC
Sensor operation (integration) starts when a software trigger is applied
from the PC.
Software trigger
Software trigger
Measurement cycle
Charge integration
Charge readout
(A/D conversion)
Digital data
KACCC0505EB
4