S9132_15 Datasheet, PDF (3/10 Pages) Hamamatsu Corporation – High-speed frame rate sensor capable of acquiring two-dimensional projection data

Profile sensor
S9132
Electrical and optical characteristics [Ta=25 °C, Vdd(A)=Vdd(D)=5 V, V(clk)=V(st)=5 V]
Parameter
Symbol
Min.
Typ.
Max.
Unit
Spectral response range
λ
380 to 1000
nm
Peak sensitivity wavelength
λp
-
650
-
nm
Photosensitivity*⁷
High gain
RES
-
40
-
V/nJ
Low gain
-
8
-
Dark current
ID
-
0.2
0.6
pA
Saturation charge
Qsat
-
8
-
pC
Feedback capacitanceof High gain
-
0.2
-
charge amplifier*⁸
Low gain
Cf
-
1
pF
-
Dark output voltage*^{9 High gain}
Vd
-
Low gain
-
100
300
mV
20
60
Saturation output voltage ^{High gain}
Low gain
Vsat
2.5
2.5
Photoresponse nonuniformity*¹⁰
PRNU
-
3.5
-
V
3
-
-
±10
%
*7: Vg=5 V (Low gain), Vg=0 V (High gain)
*8: λ=780 nm
*9: Integration time=100 ms
*10: Photoresponse nonuniformity (PRNU) is the output nonuniformity that occurs when the entire photosensitive area is uniformly
illuminated by light which is 50% of the saturation exposure level. PRNU is measured using 254 pixels excluding the pixels at both
ends, and is defined as follows:
PRNU=ΔX/X × 100 (%)
X: average output of all pixels, ΔX: difference between X and maximum or minimum output
Spectral response (typical example)
(Ta=25 °C)
100
80
60
40
20
0
400 500 600 700 800 900 1000 1100 1200
Wavelength (nm)
KMPDB0231EB
A/D converter characteristics (Ta=25 °C)
Parameter
Symbol
Digital output format
-
Resolution*¹¹
10-bit mode
8-bit mode
RESO
Conversion time
tCON
Frame readout time
FR
Conversion voltage range*¹²
-
*11: Vsel=5 V (10-bit mode), Vsel=0 V (8-bit mode)
*12: Digital output is available from MSB as serial output.
10-bit mode: D9 to D0
8-bit mode: D7 to D0
Value
Serial output
10
8
12/f(clk)
3100/f(clk)
0 to 3.8
Unit
-
bit
s/ch
s/f
V
3