S11500-1007_15 Datasheet, PDF (3/8 Pages) Hamamatsu Corporation – CCD area image sensor

CCD area image sensor
S11500-1007
Electrical characteristics (Ta=25 °C)
Parameter
Symbol
Min.
Signal output frequency
fc
-
Vertical shift register capacitance
CP1V, CP2V
Horizontal shift register capacitance
CP1H, CP2H
-
Summing gate capacitance
CSG
-
Reset gate capacitance
CRG
-
Transfer gate capacitance
Charge transfer efficiency*⁴
CTG
-
CTE
0.99995
DC output level
Vout
14
Output impedance
Power consumption*⁵
Zo
-
P
-
*4: Charge transfer efficiency per pixel, measured at half of the full well capacity
*5: Power consumption of the on-chip amplifier plus load resistance
Typ.
0.25
3000
180
30
30
75
0.99999
16
3
13
Max.
Unit
1
MHz
-
pF
-
pF
-
pF
-
pF
-
pF
-
-
18
V
4
kΩ
14
mW
Electrical and optical characteristics (Ta=25 °C, unless otherwise noted)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Saturation output voltage
Vsat
-
Fw × Sv
-
V
Full well capacity
Vertical
Horizontal*⁶
Fw
240
320
800
1000
-
ke^-
-
CCD node sensitivity
Sv
1.8
2.2
-
μV/e^-
Dark current*⁷
(MPP mode)
Readout noise*⁸
25 °C
0 °C
DS
-
100
400
e^-/pixel/s
-
10
40
Nr
-
8
16
e^- rms
Dynamic range*⁹
Line binning
Area scanning
Photoresponse nonuniformity*¹⁰
DR
PRNU
100000
30000
-
125000
40000
±3
-
-
-
-
±10
%
Spectral response range
λ
-
200 to 1100
-
nm
Point defect*^{11 White spots}
-
-
0
-
Black spots
-
-
10
-
Blemish
Cluster defect*¹²
-
-
-
3
-
Column defect*¹³
-
-
0
-
*6: The linearity is ±1.5 %.
*7: Dark current nearly doubles for every 5 to 7 °C increase in temperature.
*8: Measured with a HAMAMATSU C4880 digital CCD camera with a CDS circuit (sensor temperature: -40 °C, operating frequency:
150 kHz)
*9: Dynamic range = Full well capacity / Readout noise
*10: Measured at one-half of the saturation output (full well capacity) using LED light (peak emission wavelength: 560 nm)
Fixed pattern noise (peak to peak)
Photoresponse nonuniformity =
× 100 [%]
Signal
*11: White spots
Pixels whose dark current is higher than 1 ke- after one-second integration at 0 °C.
Black spots
Pixels whose sensitivity is lower than one-half of the average pixel output. (measured with uniform light producing one-half of the
saturation charge)
*12: 2 to 9 contiguous defective pixels
*13: 10 or more contiguous defective pixels
3